How circulation, water supply, cuttings removal and pump matching affect a wireline core drilling configuration. Use the checklist below to compare a quoted configuration with the demands of your site.
What the fluid circuit has to do
Drilling fluid carries cuttings away from the bit, helps cool cutting surfaces and supports hole conditioning. A pump chosen only by its headline output may not meet a specific hole: return path, rod size, depth, fluid properties and pressure losses all affect performance. Establish the geology and drilling method before choosing fluid volume or additives.
Match the pump to the full system
The FDX200 and FD1200 are different rig classes, but neither product name determines a universal pump setting. Ask for the actual pump model, rated flow and pressure, operating range, suction arrangement and hose connections in the proposed package. Confirm whether the quotation includes tanks, mixing equipment, water lines and spare wearing parts, or only the rig.
Plan water supply and returns
Estimate available clean water, storage capacity and the route back from the hole. A remote site may need transport and containment for water or drilling fluid. Broken or unstable ground can require a different fluid plan from a competent driller; do not assume that more flow alone will solve lost circulation. Any local discharge or containment requirements should be checked for the project location.
Monitor the hole while drilling
Compare pump pressure, returns, cuttings, temperature and penetration trends against the normal condition for the chosen system. Sudden changes are a prompt to investigate the bit, string, formation or fluid path rather than continue on an unverified setting. Operating values must come from the equipment instructions and a qualified site team.
What to request before purchase
Share expected formation, target diameter and depth, source water quality, drilling angle and the intended circulation method. For a deep program involving the FD1500, request a matched rig, pump, hose, tooling and water plan in writing. This makes quote comparisons much more useful than comparing bare-machine prices.
Further technical reading
For general operating principles, see Boart Longyear: drilling fluid and hole conditioning. Confirm all operating limits against the instructions for the actual equipment supplied.
Compare matching product pages
- FDX200 specification and configuration
- FD1200 specification and configuration
- FD1500 specification and configuration
Send the site conditions and required configuration to our team for a model-specific quotation.
Request a Quote →