Factory supply · Export support · Global deliverysales@xiaoranmachinery.cn
Home / Products / Aerial Work Platforms / GTJZ10
XIAORAN GTJZ10
SAFE ACCESS

GTJZ10

Battery-electric self-propelled scissor lift with proportional control, platform extension and integrated safety protection.

Maximum Working Height12.0 m
Maximum Platform Height10.0 m
Request a QuoteWhatsApp us about this modelCompare Models

Technical Parameters

Standard configuration shown. Final specifications can be matched to working conditions, optional equipment and destination requirements.

Maximum Working Height12.0 m
Maximum Platform Height10.0 m
Safe Working Load320 kg
Extension Deck Load113 kg
Platform Extension0.90 m
Travel Speed3.5 / 0.8 km/h
Gradeability25%
Tyre / ChassisØ381 × 127 mm
Machine Weight2,600 kg
Overall Size2.48 × 1.15 × 2.41 m
Guardrail Folded / Transport2.48 × 1.15 × 1.97 m
Power TypeBattery electric
Standard FunctionsProportional control · Automatic braking · Emergency descent · Emergency stop · Fault diagnosis · Tilt protection · Platform extension · Pothole protection

Factory Supply

Direct equipment selection and configuration support from XIAORAN MACHINERY.

Project Matching

Model recommendations based on target depth, terrain, working height or lifting requirement.

Export Support

Documentation, loading coordination and spare-parts support for international delivery.

Match the GTJZ10 to your worksite

This model lists 12.0 m working height and 10.0 m platform height, with 320 kg rated load. Working height includes an allowance above the platform and is different from platform height. Review ground conditions, access width, occupants and equipment weight before choosing a wheeled or tracked chassis.

Read equipment selection guides →   Discuss this configuration →

GTJZ10 Selection & Buying Questions

Use these answers with the published specifications to check the site, configuration and delivery requirements. Confirm the final figures against the agreed configuration, drawings and supplied manual.

Based on this page’s specification table · Updated October 4, 2026

What are the GTJZ10 working height and platform height?

The published maximum working height is 12.0 m, and maximum platform height is 10.0 m. Platform height describes the platform floor; working height includes an allowance for the person working above it. If the task requires the platform floor at a specific elevation, select by platform height and verify the actual work position.

How much weight can the platform carry?

The listed platform rating is 320 kg. Count occupants, tools and materials together. The extension deck has a separate 113 kg limit; this is not an extra allowance added to the platform rating. Follow the supplied manual for occupant numbers, load distribution and extension use.

Which dimensions should be checked before delivery?

Listed overall size is 2.48 × 1.15 × 2.41 m; folded transport size is 2.48 × 1.15 × 1.97 m. Dimensions are length × width × height. Confirm the folded configuration, access clearances, floor loading and transport weight with the selected equipment.

Is gradeability the same as an allowed working slope?

The GTJZ10 lists 25% gradeability. This is not permission to raise or drive the platform on that slope. Confirm travel, levelling, wind and raised-platform restrictions in the supplied manual; the battery-electric chassis does not by itself establish outdoor suitability.

Can a spider crane replace this aerial work platform?

Do not assume interchangeability because a crane has an optional basket. Material handling and personnel access have different selection requirements. Verify the complete configuration, manufacturer-approved use and local requirements. State whether the task is moving material, positioning workers for installation or maintenance, or both.

Match the machine to your job

Send the task, required load or height, access dimensions, site photos and destination country for a model and configuration quotation.

Ask about this model